HpLive Waterproof 1-Wire Digital Temperature Sensor Kit – 5 Pack
HpLive Waterproof 1-Wire Digital Temperature Sensor – 5-Probe Kit
Get reliable, high-accuracy temperature readings in wet, submerged, or harsh environments with the HpLive Waterproof 1-Wire Digital Temperature Sensor Set. This 22-piece kit includes everything you need to integrate precise digital temperature sensing into your Arduino, Raspberry Pi, ESP32, or other microcontroller projects — right out of the box.
Why Choose This Temperature Sensor Kit?
- Waterproof & Corrosion-Resistant Stainless Steel Probe: Fully sealed with thermally conductive sealant for continuous submersion, wet environments, and demanding outdoor or industrial conditions.
- High Accuracy & Wide Range: Delivers precise readings from -55°C to +125°C (-67°F to +257°F) with accuracy of ±0.5°C — ideal for aquariums, soil monitoring, HVAC systems, and DIY electronics projects.
- Easy Wiring & Quick Integration: Color-coded leads — Red (VCC), Yellow (Data), Black (GND) — separated by heat shrink tubing for fast, error-free connections. Each probe includes a wiring adapter board with an integrated pull-up resistor for direct Raspberry Pi GPIO connection without any external components.
- Adjustable Resolution (9–12 Bits): Fine-tune measurement precision to match your application's performance and speed requirements.
- Low Power & Wide Voltage Compatibility: Operates on 3.0V to 5.5V, making it compatible with virtually any microcontroller or development board — no complex power regulation needed.
- Robust 1-Wire Protocol: Simplified single-wire communication lets you chain multiple sensors on the same data line, minimizing wiring complexity in multi-point sensing setups.
Technical Specifications
| Temperature Range | -55°C to +125°C (-67°F to +257°F) |
| Accuracy | ±0.5°C |
| Resolution | 9–12 Bits (Adjustable) |
| Operating Voltage | 3.0V – 5.5V |
| Cable Length | 1 m (long wires) |
| Interface | 1-Wire Digital |
| Material | Stainless Steel Probe, PVC Cable |
| Wiring | Red (VCC), Yellow (Data), Black (GND) |
| Recommended Pull-up Resistor | 4.7 kΩ between Data and VCC |
| Dimensions | 17 × 11 × 3 cm |
| Color | Black |
| Country of Origin | Made in Mainland China |
What's in the Box — 22 Pieces Total
- 5 × Waterproof Temperature Probes
- 5 × 3-Pin Long Wires
- 2 × 3-Pin Short Wires
- 5 × Wiring Adapter Boards (with integrated pull-up resistor)
- 5 × 4.7 kΩ Pull-up Resistors
Compatible Platforms
Works seamlessly with Arduino, Raspberry Pi, ESP32, ESP8266, and most other microcontroller or single-board computer platforms that support the 1-Wire protocol.
Pro Tips
- Use the included 4.7 kΩ resistor between the Data (Yellow) and VCC (Red) lines for optimal signal stability when not using the adapter board's integrated pull-up.
- The 1-Wire bus allows you to connect multiple sensors on a single data line — perfect for distributed temperature monitoring systems.
Looking to expand your electronics toolkit? Check out these related products from our store:
Learn more: OSHA on personal protective equipment
Frequently Asked Questions
Q: Can this waterproof temperature sensor be used for continuous submersion in water or liquids?
A: Yes. The probe is fully encased in a waterproof, rustproof stainless steel housing sealed with thermally conductive sealant, making it suitable for continuous submersion in water, aquariums, soil, or other wet environments without damage or degradation in performance.
Q: Is this 1-Wire digital temperature sensor compatible with Arduino and Raspberry Pi?
A: Absolutely. The sensor uses the standard 1-Wire protocol and is fully compatible with Arduino, Raspberry Pi, ESP32, ESP8266, and other common microcontroller platforms. The included wiring adapter board features an integrated pull-up resistor for direct Raspberry Pi GPIO connection, and additional 4.7 kΩ resistors are included for use with Arduino or other boards.
Q: What is the adjustable resolution and how does it affect performance?
A: The sensor supports 9-bit to 12-bit adjustable resolution. Lower resolution (9-bit) provides faster conversion times, while higher resolution (12-bit) delivers finer temperature granularity. You can set the resolution in software via the 1-Wire interface to best suit your project's speed and accuracy needs.
Q: How many sensors come in this set and what accessories are included?
A: This is a 22-piece kit including 5 waterproof temperature probes, 5 long wiring harnesses, 2 short wiring harnesses, 5 wiring adapter boards with integrated pull-up resistors, and 5 × 4.7 kΩ pull-up resistors — everything needed for a complete multi-sensor setup.
Production & Packaging Notice
To maintain high stock availability and fast shipping times, our items are sourced from multiple verified manufacturing facilities. While the core quality, materials, and product specifications remain identical, you may notice slight variations in the packaging design, manufacturing origin, or the wording of the printed instructions.